Auto-PakTM Horizontal Trash Compactors

  Bag Packers
Gobbler 1 - an extremely practical, compact machine designed to meet the restricted floor space common in many apartment building refuse rooms.
Gobbler 2 - a larger machine designed for higher volumes (100+ apartments).
Gobbler 16 - for extremely large volumes, it provides a heavy duty solution to waste handling problems.

  Container Packers
Model 1830-2000 - the standard full-size machine provided with a 5 HP power unit for high volume applications.
Model 1830-Standard - also a full-size machine, has a 1 HP power unit to handle smaller volumes.
Model 1830-3001 - (1 HP) is ideally suited for those situations where shortened room length makes it impossible to use the standard length machine.
Model 1830-3005 - (5 HP) is ideally suited for those situations where shortened room length makes it impossible to use the standard length machine.
Model 1830-4000 - is a space-saving design, for trash rooms where the shortest container packer is required.

Auto-PakTM Vertical Trash Compactors

Model DD-30 - a hand fed machine.
Model DD-30C - has a section on the rear of the machine to receive trash from the building trash chute.
Model DD-30CPF - also has a chute section, as well as an additional hydraulic cylinder which precompacts trash in the chamber prior to the vertical ram coming down.

International DyneticsTM Horizontal Trash Compactors

  Bag Packers
XM-40 - the full-size machine equipped with an electrically interlocked hopper door, located on the hopper front, for service access.
XM-40M - slightly shorter machine for applications where a standard length machine will not fit. Is also equipped with an electrically interlocked hopper door, located on the hopper front, for service access.
Model 10T - The standard, full size machine is equipped with a 5 HP power unit and an electrically interlocked hopper door/lid.
Model 10TM - A slightly shorter compactor for applications where a standard length compactor will not fit. It is also equipped with an electrically interlocked hopper door/lid.
Super T - A high density compactor for bulky waste with compaction forces up to 60,000 lbs.

  Container Packers
520A - the standard full-size machine equipped with a 5 HP power unit for high volume applications.
520ESII - also a full-size machine, provides an economical solution with a 1 HP power unit for smaller buildings.
520SS - is specially designed to fit into very small trash rooms where the shortest container packer is required.
520T1 - a fully automatic, hydraulically operated packer capable of displacing up to 24 cubic yards of trash per hour.
520T5 - a fully automatic, hydraulically operated packer capable of displacing up to 65 cubic yards of trash per hour.

International DyneticsTM Vertical Trash Compactors

Model 4500 - a hand fed machine.
Model 4500-C - has a section on the rear of the machine to receive trash from the building trash chute.
Model 4500-CPF - has a chute section, as well as an additional hydraulic cylinder which precompacts trash in the chamber prior to the vertical ram coming down.

ToronitaTM Can Densifiers

Model 10P Can Densifiers - Our smallest Can Densifier designed for low volume recycling applications.
Model 20P Can Densifiers - Our most popular Can Densifer. Available in five different configurations with throughputs up to 8400 (whole uncrushed cans) per hour.
Model 40P Can Densifiers - Our high volume model designed for canning and large recycling operations.
Model 80P Can Densifiers - Our highest volume model designed for very high throughput operations.

ToronitaTM EPS Foam Densifiers

Model 15X EPS Foam Densifier - The output capacity for expanded polystyrene material is up to 50 lbs. per hour. The machine is equipped with a 5 HP motor operating at 208, 230 or 460 volts, with a 20 gallon reservoir.
Model 30X EPS Foam Densifier - The output capacity for expanded polystyrene material is up to 100 lb. per hour. The machine is equipped with a 5 HP motor operating at 208, 230 or 460 volts, with a 30 gallon reservoir.
Model 30XP EPS Foam Densifier - The output capacity for expanded polystyrene material is up to 150 lbs. per hour, vs. 100 lbs. per hour for a standard model 30X. The machine is equipped with a 5 HP motor operating at 208, 230 or 460 volts, with a 30 gallon reservoir.
Model 60X EPS Foam Densifier - The output capacity for expanded polystyrene material is up to 200 lbs. per hour. The machine is equipped with a 15 HP motor operating at 230 or 460 volts, with a 180 gallon reservoir.
Model 60XP EPS Foam Densifier - The output capacity for expanded polystyrene material is up to 400 lbs. per hour, vs. up to 200 lbs. for a standard Model 60X. The machine is equipped with a 15 HP motor operating at 230 or 460 volts, with a 180 gallon reservoir.
Model 120XP EPS Foam Densifier - The output capacity for expanded polystyrene material is up to 600 lbs. per hour. The machine is equipped with a 20 HP motor operating at 230 or 460 volts, with a 250 gallon reservoir.

Bi-Sorter and Tri-Sorter Recycling Systems

Bi-Sorter & Tri-Sorter - For multi-story buildings where the trash compactor is chute fed, the recycling sorter provides an easy method for sorting recyclables out of the waste stream. The system can be applied in either new construction or as a retrofit to an existing trash chute.



 

717-846-6800
Email Us
Request a Free Quote






“Recently named one of
America’s fastest growing
private companies by
Inc. Magazine”



Links
Auto-Pak
International Dynetics
Toronita
Trash Sorters / Recycling Equipment
Industries Served
About Us
Contact Us
Home
Contact
635 Hay Street, York, PA 17403

Tel
: 717-846-6800
Fax: 717-843-0529
Email
Copyright 2014 Precision Machinery Systems Inc.