Model 10P Can Densifier

The Toronita Model 10P Can Densifier is designed for those applications where a high density slug of beverage cans is required, but where space is limited. Operation is automatic, with the unit being activated by an electric eye which senses material in the loading hopper. The machine senses when there is a complete slug and signals the operator to unload the machine.

The hopper door is equipped with a safety switch for protection of the operator. A power unit with a 10 gallon hydraulic reservoir is provided. Industry standard components are used to make service fast and easy. The compaction cylinder has a 5" diameter bore with a 2-1/2" diameter rod. The equipment utilizes a 5 HP washdown duty motor with 3 phase, 60 cycle power at either 208, 230 or 460 volts.

Equipment is furnished with a motor starter. Control voltage is 110 volt, single phase. The finish is a gray industrial enamel paint to provide protection from deterioration.


Output Capacity
Up to 85 lbs/hr
208-230-460 V / 3 PH / 60 HZ
Cycle Time
60 seconds
Hopper Volume
5 cf
Hydraulic Reservoir Capacity
10 gallons
Densified Block Size (L x W x H)
10 x 12 x 50 in
1,600 pounds
Overall Dimensions (L x W x H)
50 x 18 x 53 in
Motor Horsepower
5 HP


Architect's Corner
Model 10P
Spec Sheet

Contact Us

Email Us
Find a Dealer / Request a Free Quote

Recommended Industries
Model 10P

Hi Rise Apartments
Hi Rise Businesses

“Recently named one of
America’s fastest growing
private companies by
Inc. Magazine”

International Dynetics
Trash Sorters / Recycling Equipment
Industries Served
About Us
Contact Us
635 Hay Street, York, PA 17403

: 717-846-6800
Fax: 717-843-0529
Copyright 2014 Precision Machinery Systems Inc.