International DyneticsTM
Model 520SS Container Packer, Horizontal Trash Compactor

The Model 520SS Container Packer is specially designed to fit into very small trash rooms where a standard machine won't fit. It is a fully automatic, hydraulically operated packer which packs into a front or rear load compaction container. The machine body, sides and top are 1/4" steel plate. The ram face is 3/8" steel plate. Header bar is 5" x 5" x 1/2" steel angle.

The hopper is constructed of 11 ga. steel plate with a 1/4" back plate to take the impact of falling refuse. The Model 520SS comes equipped with a 1 HP power unit. An industrial stationary container packer typically installed in multi-story buildings, this machines compacts trash received from a trash chute and compacts into two cubic yard front or rear load compaction containers.

The machine operates automatically by an electric eye, providing unattended operation until the container is full at which time it is removed from the machine and wheeled outside for pickup. This system reduces handling of waste and requires less custodial attention, translating into cost savings for owners and property managers. Also, because the volume of trash is significantly reduced during compaction, fewer pickups by the hauler are required, cutting disposal costs.


Chamber Capacity
Compaction Force, Max, M
13,815 lbs
Ram Face Pressure, Max, M
14.5 psi
Volume Displacement
Cycle Time
60 seconds
Overall Dimensions (L x W x H)
51 x 38 x 72 in
Weight, Without Container
950 lbs
Container Type
Steel Compaction Container
Motor Power, AC, 60 Hz
115/208/230V, 1 Phase, 15 AMP
Motor Horsepower
1 HP


Architect's Corner
Model 520SS
Spec Sheet

Contact Us

Email Us
Find a Dealer / Request a Free Quote

Recommended Industries
Model 520SS

Hi Rise Apartments
Hi Rise Businesses

“Recently named one of
America’s fastest growing
private companies by
Inc. Magazine”

International Dynetics
Trash Sorters / Recycling Equipment
Industries Served
About Us
Contact Us
635 Hay Street, York, PA 17403

: 717-846-6800
Fax: 717-843-0529
Copyright 2014 Precision Machinery Systems Inc.