Model 1830-Standard Container Packer, Horizontal Trash Compactor

The AUTO-PAKTM Model 1830-Standard Container Packer is a fully automatic, hydraulically operated packer capable of displacing up to 15.6 cu. yd. of trash per hour, packing into a front or rear load compaction container. The machine body, sides and top are 1/4" steel. Ram is constructed of 1/4" steel, with 3/8" steel face. Header bar is 5" x 5" x 1/2" steel angle.

The hopper is constructed of 11 ga. steel plate with a 1/4" back plate to take the impact of falling refuse. The 1830-Standard provides an economical solution with a 1 HP power unit. An industrial stationary container packer typically installed in multi-story buildings, the machine compacts trash received from a trash chute and compacts into two cubic yard front or rear load compaction containers.

The trash compactor operates automatically by an electric eye, providing unattended operation until the container is full at which time it is removed from the machine and wheeled outside for pickup. This system reduces handling of waste and requires less custodial attention, tranlating into cost savings for owners and property managers. Also, because the volume of trash is significantly reduced during compaction, fewer pickups by the hauler are required, cutting disposal costs.


Chamber Capacity
7.0 cf
Compaction Force, Max, M
12,090 lbs
Ram Face Pressure, Max, M
22.00 psi
Volume Displacement
15.6 cy/hr
Cycle Time
59 seconds
Overall Dimensions (L x W x H)
71 x 40 x 68 in
Weight, Without Container
1,500 lbs
Container Type
Steel Compaction Container
Motor Power, AC, 60 Hz
115/208/230V, 1 Phase, 15 AMP
Motor Horsepower
1 HP


Architect's Corner
Model 1830-Standard
Spec Sheet

Contact Us

Email Us
Find a Dealer / Request a Free Quote

Recommended Industries
Model 1830-Standard

Hi Rise Apartments
Hi Rise Businesses

“Recently named one of
America’s fastest growing
private companies by
Inc. Magazine”

International Dynetics
Trash Sorters / Recycling Equipment
Industries Served
About Us
Contact Us
635 Hay Street, York, PA 17403

: 717-846-6800
Fax: 717-843-0529
Copyright 2014 Precision Machinery Systems Inc.