MODEL 1830-2000 CONTAINER PACKER
The AUTO-PAK™ Model 1830-2000 Container Packer compactor is a fully automatic, hydraulically operated packer capable of displacing up to 43.4 cu. yd. of trash per hour, packing into a front or rear load compaction container. The machine body, sides and top are 1/4″ steel. Ram is constructed of 1/4″ steel with a 3/8″ ram face. Header bar is 5″ x 5″ x 1/2″ steel angle.
The hopper is constructed of 11 ga. steel with a 1/4″ back plate to take the impact of falling refuse. The machine floor is 1/4″ steel. It is built with a 5 HP power unit for high volume applications. An industrial stationary container packer typically installed in multi-story buildings, the 1830-2000 compacts trash received from a trash chute and packs into two cubic yard front or rear load compaction containers.
The trash compactor operates automatically by an electric eye, providing unattended operation until the container is full at which time it is removed from the machine and wheeled outside for pickup. This system reduces handling of waste and requires less custodial attention, translating into cost savings for owners and property managers. Also, because the volume of trash is significantly reduced during compaction, fewer pickups by the hauler are required, cutting disposal costs.
- Chamber Capacity: 7.0 cubic feet
- Compaction Force, Max, M: 17,580 lbs
- Ram Face Pressure, Max, M: 32.77 psi
- Volume Displacement: 43.4 cy/hr
- Cycle Time: 22 seconds
- Overall Dimensions (L x W x H): 71 x 40 x 68 in
- Weight, Without Container: 1,600 lbs
- Container Type: Steel Compaction Container
- Motor Power, AC, 60 Hz: 208 / 230 / 460V, 3 Phase, 4 Wire
- Motor Horsepower: 5
• Hi Rise Apartments
• Hi Rise Businesses