MODEL 1830-STANDARD CONTAINER PACKER

DOWNLOAD SPEC SHEET

The AUTO-PAK™ Model 1830-Standard Container Packer is a fully automatic, hydraulically operated packer capable of displacing up to 15.6 cu. yd. of trash per hour, packing into a front or rear load compaction container. The machine body, sides and top are 1/4″ steel. Ram is constructed of 1/4″ steel, with 3/8″ steel face. Header bar is 5″ x 5″ x 1/2″ steel angle.

The hopper is constructed of 11 ga. steel plate with a 1/4″ back plate to take the impact of falling refuse. The 1830-Standard provides an economical solution with a 1 HP power unit. An industrial stationary container packer typically installed in multi-story buildings, the machine compacts trash received from a trash chute and compacts into two cubic yard front or rear load compaction containers.

The trash compactor operates automatically by an electric eye, providing unattended operation until the container is full at which time it is removed from the machine and wheeled outside for pickup. This system reduces handling of waste and requires less custodial attention, tranlating into cost savings for owners and property managers. Also, because the volume of trash is significantly reduced during compaction, fewer pickups by the hauler are required, cutting disposal costs.

SPECIFICATIONS

  • Chamber Capacity: 7.0 cubic feet
  • Compaction Force, Max, M: 12,090 lbs
  • Ram Face Pressure, Max, M: 22.00 psi
  • Volume Displacement: 15.6 cy/hr
  • Cycle Time: 59 seconds
  • Overall Dimensions (L x W x H): 71 x 40 x 68 in
  • Weight, Without Container: 1,500 lbs
  • Container Type: Steel Compaction Container
  • Motor Power, AC, 60 Hz: 115 / 208 / 230V, 1 Phase, 15 AMP
  • Motor Horsepower: 1

RECOMMENDED INDUSTRIES

• Hospitals
• Hi Rise Apartments
• Hi Rise Businesses
• Schools
• Factories

We'll be glad to provide you with a free quote for the Model 1830-Standard

REQUEST A FREE QUOTE
REQUEST A FREE QUOTE